Book a live demo

Articles

Raw Material to Finished Goods Tracking: Every Step

How to track raw material to finished goods in a factory: receiving, bills of materials, production issues, waste and stock that ties to the books.

Raw material to finished goods tracking means recording every movement of material through your factory: when it arrives, where it is stored, when it is issued to production, how much is used or wasted, what comes out as finished stock, and when it leaves on a truck. If the person who does each step records it at the time, you always know where your material is and what each finished unit really cost. Here is how to set that up, with or without new software.

Why the trail breaks in most factories

Most factories do track material. The trouble is that they track it in four places that never meet. The godown keeper has a register. Production has an Excel sheet. Purchase approvals sit in a WhatsApp group. Accounts works from supplier bills and a cost estimate someone made years ago.

So when the owner asks a simple question, "how much raw material do we actually have?", he gets three answers. The warehouse says one figure, sales says another, accounts says a third. Nobody is lying. Each of them is looking at a different, incomplete record.

The gaps usually sit at the handover points. Material is issued to the floor on a verbal request. Leftover pieces come back to the godown and nobody writes them in. A rejected batch is reworked and quietly added to the next day's output. Each of these is small. Together, they are where stock goes missing and cash leaks. The owner finds out at the physical count or, worse, at audit time.

One more sign worth noticing: if your team keeps extra buffer stock "just in case", ask whether demand is really that unpredictable or whether nobody trusts the records.

The five points where material must be recorded

You do not need to track every movement in the building. You need to track the handovers, the moments when material passes from one person's responsibility to another's.

  1. Receiving. Material arrives against a purchase order. Someone checks the quantity and quality and records what actually arrived. The supplier's bill may say something different.
  2. Storage. The material goes to a known place in the godown, so it can be found and counted.
  3. Issue to production. Material leaves the godown against a specific production order, never "for the floor" in general.
  4. Output and waste. Production records what came out: good units, rejected units, scrap, and leftover material returned to store.
  5. Finished goods to dispatch. Finished stock moves to dispatch and leaves against a sales order and a delivery note.

If those five points are recorded honestly, the movements in between take care of themselves. If any one of them is skipped, the trail breaks there.

Start with a bill of materials

A bill of materials, or BOM, is the recipe for one finished product. It lists which raw materials go into it and in what quantity. It is the most useful single document for raw material to finished goods tracking, because it tells you what should have been used.

Say a ceiling fan assembler in Gujranwala makes a standard fan from a motor housing, copper wire, blades, a capacitor and a set of screws. The BOM lists each of those per fan. When production makes a batch, the clerk or the system multiplies the BOM by the number of fans and compares the result with what was issued from the godown.

The difference is the interesting part:

  • If less was used than issued, the rest should be back in the godown. Is it?
  • If more was used, where did it go: waste, rework, a wrong BOM, or out of the gate?
  • If the gap shows up on the same shift or the same line again and again, you now know where to look.

Without a BOM, production cost is a guess. With one, it is a calculation, and the gap between expected and actual becomes something you can act on.

Keep BOMs honest. When a design changes, or a supplier's material behaves differently, update the BOM. Otherwise your variance reports will cry wolf and people will stop reading them.

Connect the floor to the books

Tracking material in quantities is half the job. The other half is value.

When stock records sit apart from the accounts, cost of goods sold gets worked out at year end from an opening figure, purchases and a closing count. Any error in the count flows straight into your profit. Then the auditor arrives, the stock ledger says one thing, the books say another, and a long stretch of time goes into explaining the difference.

When every receipt, issue and output also posts to the accounts, the numbers move together. Raw material becomes work in progress. Work in progress becomes finished goods. Finished goods become cost of sales when they are dispatched.

Each entry should also carry the name of the person who made it and the time it was made. This is not about suspicion. It means that when a figure looks wrong, you can trace what happened instead of calling a meeting to argue about it.

Making it work with people who are not IT-trained

The best tracking system fails if the godown keeper will not use it. A few practical points:

  • Start where the leak is. Pick one product line, or your highest-value material, and track it properly first.
  • Count before you start. Do a careful physical count so your opening figures are real. Tracking from a wrong starting point only produces wrong numbers faster.
  • Make entry easy at the point of work. If the godown keeper has to walk to an office computer, entries wait until evening and some get forgotten. A phone in his hand changes that.
  • Use the language people think in. Staff who ran their part of the business in a register or an Excel workbook record more, and more accurately, on screens they can read comfortably.
  • Give each person only their part. A screen that shows only what someone needs is less intimidating, and it protects the rest of your data.

Before you choose any system, put your own questions to the vendor and get the answers in writing.

Where Sentinel fits

Sentinel puts the whole trail in one system. Purchase, Inventory, Warehouse, Manufacturing with bills of materials, Dispatch and Accounting work in the same place, so a receipt, an issue to production and a dispatch show up in both the stock ledger and the books. Every entry records who made it and when.

Shop floor screens can be in Roman Urdu, for staff who used to run their part of the business in Excel workbooks. Sentinel works on desktop and on every phone. Access is by role, so the godown keeper sees and changes only what his role allows, while directors see the whole business in one place.

The AI agent works inside the ERP and reads every department. You can ask it in English or Roman Urdu: "Kis item ka stock kam hai?" It runs checks for stock below zero, totals that don't add up, missing fields and work left unfinished, and raises each problem to the person responsible for it. It never changes a record by itself. Make it. Store it. Count it.

Questions owners ask

Do we need to track every screw and spool of thread?

No. Track materials by value and by how easily they disappear. Low-value consumables can often be issued in bulk and expensed. Put your effort into the materials that drive your cost.

If we track everything, do we still need physical counts?

Yes. Good records reduce surprises, but they do not replace counting. Many factories count a few items in rotation instead of shutting down for one big count, and good records make each count easier to reconcile.

How is Sentinel priced?

Rate on request. A quote depends on how many people use Sentinel, how many companies it keeps the books for, and which departments you need. It starts with a live demo, followed by a quote.

If you want to see raw material move from the godown through production to dispatch in one system, using sample data, book a live demo. Bring your hardest question about your own factory and we will walk through it with you.

Sentinel

ERP · CRM · AI agent